Products :: chemicals :: natural stone care*

 

*listed prices include FREE 48hrs. delivery service on orders $150+. $ave up to 20% when you pick up at our walk-in showroom

 

HG Marble Wash & Shine
HG marble wash & shine leaves minuscule acrylic balls behind on the surface. This protects the marble surface and any applications of HG marble shine finish against scratching. The surface gets a new gloss at the same time. Add one cup full of HG marble wash & shine cleaner per litre of lukewarm water. Mop the floor. It is not necessary to rinse off or dry the floor afterwards.
113004 
HG-Marble&Stone wash & shine,1L
$25.99
113002 HG-Marble&Stone Natural floor soap, 1L   $19.99
113015 HG-Marble&Stone bathroom cleaner .5L    $19.99
3 HG Marble Cement, Grout Release & Lime Film Remover
HG marble cement & lime film remover removes cement film and lime scale from marble and other sorts of calcareous of natural stone such as travertine, granite, terrazzo and ashlar. Dilute HG marble cement and lime film remover in water. Then apply with a scrubbing brush. Allow a few minutes for the product to work, scrub well and rinse off with water. One litre is enough for a floor surface area of 40 to 50 mē.
3 HG Marble Cement & Lime Film Remover, 1L $29.99
3 HG Marble Cement & Lime Film Remover, 5L $99.99
HG Marble Stripper
  HG marble stripper is a powerful cleaner for the removal of HG marble shine finish and stubborn dirt and grease. Dilute HG marble stripper in 1 litre of lukewarm water. Then apply with a scrubbing-brush. Allow a few minutes for the product to work, scrub well and rinse off with water. One litre is enough for a surface area of 15 mē.
100187 HG-Marble Striper,1L,wax remov.&clean.

$19.99
Marble & Stone Super Stripper
Extremely powerful cleaner for the demanding work, to remove old layers of polishes and waxes, but also stubborn dirt and grease from calcareous natural stone surfaces. Also great basic cleaner before crystallisation.

Suitable on all and any calcareous natural stone surface, like marble, travertine, limestone, terrazzo, but also great for use on non-calcareous stones like granite.
May be used by hand or cleaning machine application.

To remove polishes ansd waxes, and to remove deep embedded dirt, dilute at a ratio from 1:10 to 1:4 with lukewarm water.
Apply dilution over the surface to be cleaned, and leave to activate for a few minutes, before scrubbing with a soft brush, until dirt's, polishes and /or waxes have loosened. Do NOT allow to dry, but rinse twice thoroughly. Then mop surface dry. Best results are obtained by use of cleaning machine and wet-vacuum.
Marble & Stone Super Stripper, 5L

$79.99
HG Marble Impregnator
HG marble impregnator penetrates deep into the surface and completely seals off small pores. Larger pores are made smaller meaning liquid molecules can no longer be absorbed. However, any dampness in the floor can still evaporate. It is suitable for inside and outside use. Apply HG marble impregnator evenly in one direction with a paint roller or a non fluffy cloth. Allow to penetrate for a maximum of 5 minutes. Then remove any surplus with a dry cloth. One litre is enough for a surface area of 10 to 20 mē.
113006 HG-Impregnator,Marble&Stone sealer 1L

$44.99
113007 HG-Impregnating,Marble sealer 5L

$169.99
HG Stain Protector
  HG stain protector is for use on unglazed ceramic tiles, percellanato, glazed stone stonewear, slate, marble, granite and other sorts of natural stonework. It provides protection against almost all water-based spillages - such as those made by wine, cola, etc.- and against oily spots and general contamination. As the porous based materials are protected deep within the pores HG stain protector is suitable for use in the living room, kitchen and bathroom.First thoroughly clean the surface that is to be treated. Ceramic tiles, granite, slate etc. should be cleaned with HG polish, wax and dirt remover. Marble and grades of limestone should be cleaned with HG marble shine finish remover. Unpolished floor tiles, such as for example polished stone wear and porcellanato should be cleaned with HG porcelain cleaner. Using a brush or a roller, apply a liberal coating of HG stain protector. It is recommended that very porous base materials are treated a second time. 1 litre of HG stain protector is sufficient for 100 mē. All HG maintenance products for the base materials can be used as normal.

HG Stain Protector, 1L $59.99
HG Stain Protector, 5L $199.95
HG Marble Shine Finish
Waterbased, metal-linked, acrylic polymer protective polish topcoat, for interior use only.
Excellent extra protection overtop penetrating sealers, that adds topical gloss, enhances colour and prevents staining. Selfshining and anti-slip.

Suitable on all and any calcareous natural stone that requires extra gloss, like dullish marbles, travertines, limestone and terrazzo. Do NOT apply on granite, nor on any other surfaces in outdoor applications

Ensure that surfaces are clean, dry and free from dirt and dust.
Do NOT stir or shake bottle to avoid foaming. Apply thinly with wax applicator or lintfree cloth. Allow to dry for 45 min. before applying a second coat at right angles.
Wear areas and tracks may be treated seperately when necessary, without stripping, but ensuring that surface is clean. After 10 to 12 applications we suggest to strip surface with HG Marble & Stone Stripper, and start procedure over.
To achieve higher gloss, each layer applied may be buffed with white pad and high speed buffer.
Regular maintenance with HG Marble Wash & Shine
HG Marble Shine Finish, 1L $39.99
HG Marble Shine Finish, 5L $149.99
HG Marble Crystallizer
Fizzy drinks or fruit juice for example can damage marble and result in a it becoming dulled. HG marble crystallizer restores the shine on such an areas. Apply HG marble crystallizer with a cloth onto the surface and buff this in with the steel wool pad attached to the bottle. Keep buffing until a deep gloss appears.
113011 HG-Marble Crystallizer,1L

$59.99